Aluminum composite panel is a new architectural decoration material, which is widely used in various architectural wall decoration. In developed countries, aluminum composite panels are also used in the manufacture of buses, trains, airplanes, ships, etc. What are the thickness specifications of aluminum composite panels?
Usually, the aluminum composite panel standard size is 1220mm by 2440mm, which is 4feet by 8 feet. But in addition to the standard size, ACP composite panels can be customized according to customer requirements. Alusign ACP can produce panel width 1220mm, 1250mm, 1500mm, panel length 2440mm, 3000mm, 5000mm.
ACP cladding can be roughly divided into interior panels and exterior panels. The acp cladding for general interior is about 1.22m*2.44m*3mm, and the thickness of the exterior decoration is 4mm. Aluminum composite panel standard specifications: 1220 * 2440 * 4mm / 3mm, the thicker the aluminum skin, the better the quality, the more expensive the price, other sizes can be negotiated with the manufacturer according to the requirements.
a, aluminum composite panel for building curtain wall:
The minimum thickness of the upper and lower aluminum plates is not less than 0, 5 mm, and the total thickness is not less than 4 mm. The material of aluminum should meet the requirements of GB/T 3880. Generally, aluminum alloy sheets of 3000, 5000 series should be used. The coating should be coated with fluorocarbon resin.
b. Aluminum composite panels for exterior wall decoration and advertising:
The upper and lower aluminum plates are made of rust-proof aluminum with a thickness of not less than 0.2 mm, and the total thickness is not less than 4 mm. The coating is typically a fluorocarbon coating or a polyester coating.
c. Aluminum composite panel for indoor use:
The upper and lower aluminum plates are generally made of aluminum plates having a thickness of 0.2 mm and a minimum thickness of not less than 0.1mm, and the total thickness is generally 3 mm. The coating is polyester coated or acrylic coated.
In essence, the main reasons for the chromatic aberration are:
1.Process reasons. The difference in product manufacturing process will inevitably lead to differences in product color. For the current manufacturers of acp composite panels in China, it is very difficult to achieve the same process control conditions, so there must be certain color differences between different batches.
2.Raw material reasons. The difference between suppliers. The control of color production has a very large impact. The raw materials of the paint factory are almost all from different places. If different acp panel suppliers are required to modulate the same color, there are already differences in the raw materials.
3.Equipment reason. Different coating equipments also have some differences in the strength and brightness of the coating.
1.Super weather resistance
Due to the use of KYNAR-500-based PDVF fluorocarbon paint, it has unique advantages in weather resistance. It does not detract from its beautiful appearance in hot sunlight or cold snow, it will not fade up to 20 years.
2.Uniform coating and diverse colors
Through the chemical treatment and the application of Henkel’s film technology, the adhesion between the paint and the aluminum-plastic panel is uniform and the colors are diverse, allowing you to choose a larger space and show your personality.
The aluminum composite panel has been significantly improved in terms of pollution resistance. China’s urban pollution is more serious. It needs to be maintained and cleaned after several years of use. Because of its good self-cleaning property, it only needs to be cleaned with a neutral detergent. After cleaning, the acp composite panels will be restored as new.